on most orders over $195 shipped to the

CMB Tridelta Tactical Muzzle Brake (9/16" - 24)- IET Model #301b


Add to Cart:

Customers Note !!!
This item CANNOT be shipped outside the US!

Custom Muzzle Brakes TriDelta Tactical Muzzle Brake 9/16"-24 threads

CMB Tridelta Tactical Muzzle Brake will work on rifles taking 9/16"x24 TPI (Threads Per Inch) Caliber 5.56mm/ .223/40 cal/9mm.

The TriDelta Tactical design yields serious recoil reduction effectiveness . This means fast follow up shots or emptying your mag with little muzzle rise and less recoil. The baffles are designed to efficiently capture the muzzle blast to reduce recoil while simultaneously directing noise and blast away from the shooters position.

Note: These muzzle brakes will work on Kel-Tec Sub2000 Gen 2:
  • They will not fit Gen 1 Sub 2000.

9mm Sub2000 Gen. 2 (Front Sight Removed) require:
  • IET Model 301a 1/2"-28 version

  • a quantity of 2 >IET Model 303b 9/16"-24 Thread Protectors

  • This would be when a customer is removing the front sight and using a scope or Red Dot and wants a Muzzle Brake to hide the threads on the barrel.

9mm Sub2000 Gen. 2 (Front Sight Retained) require:
.40 Cal Sub2000 Gen. 2 require: If you have any questions, refer to Kel-Tec Sub2000 Series Manual pages 14-16.

  • Unified National (SAE) designed for installation on threaded barrels with 9/16"-24 threads.

  • Set screw and wrench included (ready to install)

  • Does NOT interfere with sights

  • Dimensions: 0.95" diameter x 1.5" long x 0.77" across flats (USPSA, IDPA & SOF legal dimensions)

  • Weight: 2.0oz

  • SMALL & COMPACT highly effective

  • Black mil-spec finish

  • Optimized baffles for maximum brake performance and low noise from shooters position

  • No ports on bottom of brake = no dust printing from prone shooting position

  • DELTA port on top further reduce muzzle rise

  • Designed in and Made in USA with USA steel!

  • Model: IET Model #301b
  • Shipping Weight: 0.25lbs
  • Manufactured by: Custom Muzzle Brakes