Accessory Rails for Ruger SR-22 & other Rifles and Pistols.

Iron Eagle Tactical is focused on providing high-quality service and customer satisfaction.

We are the only company selling full rail systems for the Ruger SR-22. We have accessories for the Ruger SR-22 and many other rifles. Check out our products.

There has not been a fundamental change to the Picatinny Rail system since its conception in 1995. Iron Eagle Tactical has changed that with their new E-TAC RAIL SYSTEM, (Patent Pending).

Our Accessory Rail Systems are custom built, to fit our customer’s needs..

Iron Eagle Tactical is proud to introduce a completely redesigned rail system (Patent Pending).

E-Tac is the first rail system to offer the customer a choice as to how they will use it.

E-Tac has three features that no other rail offers:

First, the square slots have been replaced with beveled slots. This gives more strength to the rail and provides a base for attachments to fit better with no chance for movement of accessories on the rail.

Second, the bottom of the rail has been opened up to allow for concealment of accessory wires.

Third, our new Draft System. This provides a drafting of air through the rail and is exported through exhaust ports along the sides of the rail providing a cooling effect to the whole system. More air moving around the barrel produces less heat stress on your tactical equipment and cooler operation on the forearm. A cooler operating system means more reliability and longer life for your rifles and pistols.

Our latest application of this system is to the Ruger SR-22 Tactical Rifle.

NOTE !!! All E-TAC Rails, Brush Guards, & Iron Eagle Talon Flash Hiders below have Type 3 Hard Coat anodization and are Non-Reflective black.

E-TAC RAILS

(Model 101) Our standard rail system consists of four, nine (9) inch long rails, placed at the top, bottom and on both sides of the forearm.

This will allow the attachment of a bipod with the Picatinny mount and provides room for rail guards and tactical foregrip

This model includes screws, and one hex wrench.

(Model 102) consists of three, 9” long rails & one, 5 3/4” long rail.

One on top, one on both sides and the short rail on the bottom.

The short rail allows for the attachment of the Bi Pod directly to the sling stud on the forearm and leaving room to attach a foregrip and rail guards.

This model includes screws, and one hex wrench.

They both provide space for a variety of possible accessory attachments.

For the owner that prefers Iron Sights, IET has 2 New Top Rails:

(Model 103a) Ruger SR-22 Top Rail, Eleven and five eighths (11 5/8) inches long, with screws, and a one hex wrench.

It extends from the existing Picatinny rail on the SR-22 rifles to 1 1/4 inches past the forearm. It, also, has the Combat Draft System.

(Model 103b) Ruger SR-22 Top Rail, Ten and three eighths (10 3/8) inches long, with screws, and a one hex wrench.

It extends from the existing Picatinny rail on the SR-22 rifles to the end of the forearm. It, also, has the Combat Draft System.

(Model 104 a,b) - Combat Brush Guard offers additional protection for the Ruger SR-22.

This Brush Guard fits over the barrel on to the front of the forearm. Providing protection from foreign objects entering the front of the forearm and enhances the looks of the rifle.

Model # 104a has a fin design.

Model # 104b is a bullet design.

(Model 105 a,b,c,e) - Eagle Talon (Flash Hider)

The Eagle Talon's are designed using 6061 T6 aluminum and coated with type 3 anodization.

They are designed to conceal the area where the Talons fit over the barrel. This will hide the threaded area and give a cleaner, more combat ready look to the rifle barrel.

We offer the buyer additional choices. If you only need one, two or three rails. We have you covered!

(Model 106 a,b,c) - Individual E-Tac Rails.

These rails all come with the Beveled Slots, Wire Concealment, and Combat Draft System.

Included with each rail are screws. A hex wrench will be included with each rail order

Model # 106a has the hole in the E-Tac rail for the sling swivel stud. (9" Long)

Model # 106b does not have the hole in the E-Tac rail for the sling swivel stud. This one can be used on the sides and the top of the forearm.( 9" Long)

Model # 106c This one is for the bottom of the forearm. Allowing the Bi Pod to attach to the forearm directly. ( 5 3/4 " Long)

Model 107 - High quality Iron Eagle Tactical Cap

Variety of colors and styles.

(Model 108 a,b,c) - Scope Riser Mounts

Model # 108a - 1" scope mount Made of anodized aluminum with locking plate and retention thumb nuts.

This Tactical Scope Mount attaches to your Top Rail.

If you are having trouble seeing through your scope because of too short of scope rings, this may be what you need.

Very quick and easy to install.

>Model # 108b - UTG 1" Scope Riser with See-through Design.

5.7" Top Picatinny Rail with 13 Slots and STANAG Feature for Flexible Accessory Application.

Thumb Nuts and Locking Plate for Quick Easy Installation.

Will fit on a variety of rifles.

Model # 108c - UTG Tri-Rail See-Thru Riser Mount with Picatinny Rails for flashlight, laser and additional accessory application.

Comes with Mounting base and Locking plate to fit on any E-Tac, Picatinny or Weaver Rail.

Additional STANAG dimension of STANAG scopes.

Ideal height, length and spacing to accommodate most versatile applications.

Will fit on a variety of rifles.

Model 109 - FM 3-9x26 MilDot Tactical Scope

No more guesswork, when you're looking through this high- performance Scope.

The Images are SHARP and CLEAR, even in dim light.

A 7-position rheostat for reticle brightness control, makes it the perfect feature to have in the early morning or toward evening when there's low light out there.

You will like the performance of this scope.

Detail Information:

Euro (Compact) Rifle Scope

3-9 variable zoom power with 26mm objective front.

Tube Diameter, 1"

Weight 14.4 OZ, Length 8.15"

8" Eye relief

Also included, but not shown is a riser block

Illuminated Mil Dot Reticle.

Matte black finish, with three Picatinny rails.

Fully coated lenses.

Field of View- (100YD) 83.88' - 31.5'

Shock, water, and fog proof.

Lens Caps included

8.9" long.

Model 110 - Tactical OP-1 Bipod Fits Iron Eagle Tactical E-Tac Rail Model 106a or 106c/Picatinny/Weaver Rails

Foldable Arms with Robust External Spring Tension Control

Fully Extendable Legs with Posi-lock Wheel & Quick Retraction Button

Center Height Adjustable from 6.1" to 7.9"

Leg Length Extendable from 5.5" to 7.4"

Will fit on any rifle that has a E-Tac, Picatinny, or Weaver rail system under the forearm.

Model 111a - Five position Foldable Foregrip Fits all Iron Eagle Tactical, E-Tac / Picatinny / Weaver Rails

Use Position Button to Fold Forward/ Backward and Lock the Grip

Designed with Battery/Tool Compartment (1 AA or 2 Lithium Batteries)

Side slides allow for Ambi Use of Pressure Pad

Ergonomic Finger Groves for most Comfortable Grip

Will fit on any rifle that has a E-Tac, Picatinny, or Weaver rail system under the forearm.

Model 111b - UTG Combat Foregrip

Molded from Impact Resistant Advanced Polymer.

Ambidextrous Design with Anti-fatigue Thumb Rest and Trigger Finger Shelf to Offer the Best Shooting Comfort.

Symmetric Palm Swell and High Tech Texture with Slip-resistant Finish for Firm Handling and Hand Support.

Smart End Cap to Conceal Storage for Most Needed Accessories and Parts.

Will fit on any rifle that has a E-Tac, Picatinny, or Weaver rail system.

Note: This product fits the foregrip only! Model # 133 fits the pistol grip.

Model 112 - UTG 12 pcs Rubber Rail Guards (Black) Premium Rubber Rail Guards with Flexible Adjustment

Model 114 - UTG combat Weapon-mount and Handheld Tactical Xenon Flashlight

FEATURES:

Integrated reflector & Bulb (IRB)

Combat Tactical Front Head

Preset Optimal Focus Beam

Precision Machined Aircraft-grade Aluminum Tube

Anodized Black Matte Finish

Twist-on and Momentary Push-on Operations

Law Enforcement Rated rolling stop shoulder

Pressure Switch for Firearm Application

SPECS:

26mm Xenon Bulb

126 Lumen Max. Output

70 Minute Battery Life

Cr123A Battery 2x Included

Pressure Switch Included

Tactical Flashlight Ring Included

Model 115 - Command Arms™ Collapsible Butt Stock W/ Battery Compartment and Picatinny Rail

Very easy to install on your existing SR-22 tube rail.

Will fit any rifle with Collapsible Butt Stock.

Model 116 - AR-Pistol Grip Plug (Black)

This is the answer to that big hole in the pistol grip on the SR-22 that you can't do anything with.

This grip is ergonomically designed and is manufactured to a high quality standard.

Easy to install. Proving an extra place on the SR-22 to hole accessories you might need in the field.

Model 117 - UTG Combat 26mm IRB LED Flashlight, with Interchangeable Mounting Deck

Detail Information:

• UTG Combat Weapon-mount and Handheld Tactical LED Flashlight

• Best in Class with CREE Q5 LED

• Integrated Reflector and Light Bulb to Provide Instant Spot Focus for Clear Object Identification

• Twist-on, Push-Button and Remote Pressure Switch Triple on/off Systems

• Combat Tactical Front Head

• Law Enforcement Rated Rolling Stop Shoulder

• Interchangeable Mounting Deck and Handheld Main Body

SPECS:

Material: Aluminum

Weight with Battery: 6.5 oz

Flashlight Bulb Type: 26mm LED IRB

Flashlight Voltage(V): 6

Flashlight Max. Lumen(Lumens): 150

Flashlight Battery Operating Time: 2hrs+

Switch Operating Type: Push-button Momentary/Twist-on Permanent Switch

Flashlight Focus: Preset

Pressure Switch Included: Yes

Diameter: 1.07"

Length: 5.26"

Color: Black

Model 118 - UTG Combat Tactical Red Laser W/Accessories

Detail Information:

UTG Combat Tactical Red Laser

TS Rated Laser with Precise and Wide Range Windage and Elevation Adjustments

Ambidextrous Push-button Switch and Pressure Switch Included

Complete with E-Tac/Weaver/Picatinny Tactical Laser Ring

80 Minutes of Battery Life

6000 Hrs of Laser Beam Life

4-LR44 (AG-13) Batteries included

Hard Anodized Finish for Wear Resistance

Model 119 - UTG 38mm Tactical Dot Sight (Red / Green)

Detail Information:

Quick Aim Electronic Dot Sight with Red/Green Dual Illumination

Includes Integral E-Tac, Weaver Mounting Deck

Flip-open Lens Caps

Battery is included

Flip - Open Lens Caps

Lens cleaning cloth

Model 120 - Magpul MBUS Front and Rear Sight

Specifications:

Magpul (MBUS) Back-Up Sight

Set of Front & Rear Sights

DuPont Polymer Construction

A Sight Designed As A Low-Cost. Folding Back-Up Sight

Spring Loaded Flip-Up system, release lever can be reached on left, right & top position

Solid click sound when sights are locked into position

No need to release lock to fold

Standard Adjustable M16 Style Sight Post

Rear sight comes with Dual Apertures and Adjustable Windage

The MBUS Fits All mil-spec 1913 Picatinny and E-Tac rail equipped weapons, but is specifically tailored to the Tactical Rifle platform.

Model 121 - SR-22 Competition Ext. Magazine Release

You will never again have to pry the magazine from your rifle.

This release extends below the trigger Guard Assembly for easy magazine changes with either index finger.

Milled from solid 6061 -T6 Aircraft Aluminum it dramatically increases the speed of changing magazines.

This is a must for competition shooting.

Available in Black or Silver.

Model 122 - UTG 6.8" ITA Red/Green Dot Sight with Integral QD Mount & Flip-open Lens Caps

Detail Information:

• Great Field of View and Unlimited Eye Relief

• Clear and Sharp Dot Sight

• No-Reflection High Tech Emerald Coatings

• Low Profile Integral One Piece Quick Detach Picatinny/Weaver Mount for Fast Deployment and Full Adjustability to Fit on Any Picatinny/Weaver Rail

• Red or Green Dot Adapts to Any Environmental Background

• Patterned Illumination Rheostat with Variable Brightness Levels Offers Stealthy and Infinitely Fine Adjustment

• Aim and Instant Lock on Target to Enhance Shooting Accuracy and Performance

• Most Versatile Dot Sight for Wide Range of Shotguns & Rifles

Model 123 - UTG Tactical Single Point Sling - Black

Detail Information:

• High Strength 1.25" Nylon Webbing for Maximum Durability

• Heavy-duty Metal Lock Hoop for Secured Attachment and Speedy Deployment

• Protective Elastic MASH Hook Cover For Silent Operation

• Durable Heavy-duty Elliptical Bungee for Close Body Carry and Easy Weapon Handling

• Adjustable from 42" to 58" Sling Length to Accommodate All Body Sizes and Gear Types

• Equipped with Additional Single Point Sling Adaptor Strap and Stock Adaptor Strap for Multiple Weapon Attachment Options

Model 124 - ITW CLASH HOOK

Detail Information:
The C.L.A.S.H. Hook [Conventional Latch Attachment Snap Hook] was designed to meet the needs of sling and strap applications that require a quick-on feature with spring loaded retention gate.
The body is made from one solid steel stamping and has a slot designed to accept 1” webbing for weapon slings. If your application demands an all metal heavy tensile load system, C.L.A.S.H. Hook is the easy choice.
• Designed For 1-Inch Webbing
• Carbon Steel
• Made in USA



Model 125 - Combat 23mm IRB LED Pistol Flashlight

Detail Information:
• UTG Integral Tactical LED Pistol Flashlight
• Best in Class with CREE Q5 LED
• Integrated Reflector and Light Bulb to Provide Instant Spot Focus for Clear Object Identification
• Ambidextrous Finger Adjustable Toggle/Permanent On/Off Switch
• Complete with Integral Picatinny/Weaver Mounting Deck and 2 Lithium Batteries



Model 126 - UTG Deluxe Pistol Cleaning Kit in Wooden Case

Detail Information:
• Nylon, Bronze and Cotton Bore Brushes for Light to Heavy Cleaning Requirements
• Solid Durable Copper/Aluminum Construction for Rod and Brush Shafts
• Most Comfortable Rubber Grip
• Standard Thread Size 8-32
• Deluxe Wooden Case for Convenient Carrying and Storage
• Brushes for .22, 9mm and .45 Cal Pistols Respectively and High Quality Patches



Model 127 - Ambi Sling Adapter Plate

Increases Sling-Attachment Versatility On Collapsible-Stock Rifles & Carbines
• Machined steel replacement for the factory receiver plate.
• Gives an AR fitted with an M4-type collapsible buttstock a convenient, low-profile attachment point for clip-on, single-point slings.
• Precision machined from 1018 carbon steel for superior strength and an exact fit.
• Durable manganese phosphate Parkerized finish that resists surface abrasion and corrosion, and matches the finish on mil-spec anodized receivers



Model 128 - EMA Tactical Cheek Rest for Collapsible Stock

• Raises Eye level for Proper Alignment of Optics.
• Installs Instantly on most Collapsible Stocks.
• Made of rugged Glass Reinforced Polymer to withstand harsh tactical conditions.
• Snaps into place, No tools required
Model # 128a
• 1.25 in Rise
• Length (in.): 5", Height (in.)2.5", Width (in.) 1.875", Weight (oz.) 2.0
Model # 128b
• .7 in Rise
• Length (in.): 3.8", Height (in.)2.12", Width (in.) 1.875", Weight (oz.) 1.6



Model 129 - Target Shooting Stand

Provides a solid platform for hand support during sustained target exercises.
• Flat surface helps stabilize and support the rifle.
• Stand Snaps into the UPG style grips.
Another accessory that complements the Shooting Stand is the Six Pieces Interchangeable Pistol Grip, Model # 133 a or b.
Coupled together, these accessories make a very nice addition to any Ruger SR-22, M-16 or AR-15 rifle.




Model 130 - 4X32 Extra Long Eye Relief TS Compact Scope with Picatinny /Weaver Rings

Detail Information:
• Absolutely Must-have to Meet the Non-compromising Requirements of Long Eye Relief and Widest Field of View for Most Natural and Accommodating Shooting Positions
• Innovative Instant Target Aiming (ITA) Technology with Precise and Wear-resistant Click-stop Feature to Deliver Optimal Performance Under the Most Demanding Shooting Conditions
• High Tech for Fly Hunt, Drive Hunt and CQB Missions
• Sapphire Lens Coatings
• Instant Lock Mil-dot Range Estimating Reticle
• High Quality RGB Side Wheel Illumination for Clear Twilight Vision
• Complete with 1" AccuShot Low Profile Picatinny Rings
• Flip-open Lens Caps IncludedParallax Adjusted at 100 Yds



Model 131 - Bug Buster 3-9X32 Compact AO Mil-dot RGB Illuminated Scope

Detail Information:
• Revolutionary Triple S Structure (Smart Spherical Structure) TS Construction to Simplify and Strengthen Inner/Outer Scope Tube Interaction for the Most Effective Telescopic Functions
• Most Innovative Parallax Adjustment from 3 Yards to Infinity
• Mil-dot with High Tech RGB Dual Color Side Wheel Illumination
• Precision and Stay Zero Technology to Deliver Most Dependable Performance
• True Hunter Finger Adjustable Precision Windage/Elevation Adjustment
• 2" Sniper Sun Shade
• Sniper Black Flip-open Lens Caps



Model 132 - UTG 30mm SWAT 3-12X44 Compact IE Scope w/ AO Mil-dot, 36 Colors EZ-TAP

Detail Information:
• 30mm Tube with Best in Class Multi Emerald Coated Lenses to Achieve Maximum Light Transmission for Best Clarity
• Built on True Strength Platform, Completely Sealed and Nitrogen Filled, Shockproof, Fogproof and Rainproof
• Illumination Enhancing(IE) Reticle Offers the Multi-color Mode with 36 Colors from the Color Spectrum for Personalized Illumination and All Environment Shootings, as well as the Original RGB Mode of Red/Green Illumination with 7 Brightness Settings - Enhancing Reticle Visibility and Target Acquisition in the Most Extreme Conditions
• Most Innovative, Low Profile Illumination Control with 2 Soft and Ergonomic Control Buttons Designed for Most Natural, Smooth and Quick-reaching Hand/Finger Operations
• Special Circuit and Housing Design for Uninterrupted Illumination Even Under Heavy Recoil
• Premium Zero Locking and Zero Resetting Target Turrets with Most Consistent and Precise 1/4 MOA per Click Windage/Elevation Adjustment
• Side Wheel Adjustable Turret (SWAT) for Parallax Adjustment - from 10 Yards to Infinity; Side Wheel Ready for Optional Big Wheel to Achieve Finer Parallax Adjustment
• Integrated Angled Front Sunshade Complete with Flip-open Lens Caps and High Quality Max Strength Quick Detach Picatinny/Weaver Rings



Model 133 - Interchangeable Pistol Grips for Ruger SR-22, M-16 and AR-15 rifles

Detail Information:
• This six pieces interchangeable pistol grip easily replace the standard grip, incorporating multiple finger groove and palm swell inserts (3 each), allowing the operator to customize their grip to fit all hands sizes for maximum comfort in control.
• They are available in Black (Model #133a) and Sand (Model #133b).
Another accessory that complements this set up is the Target Shooting Stand Model # 129 a or b.
Coupled together, these accessories make a very nice addition to any Ruger SR - 22, M-16 or AR-15 rifle.



Model 134 - UTG Front & Rear Flip-up Sight Set - (includes 1 front & 1 rear flip-up sight)

Front Sight Detail Information:
• Quick Detachable Front Sight with Adjustable A2 Square Post Assembly to Fit All Picatinny/Weaver Style Rails
• Equipped with Locking Retention Thumb Nut andClever and Robust Flip-up Posi-lock Design to Guarantee Zero in the Most Extreme Combat Condition
• Precision Elevation Adjustments to Enhance Shooting Accuracy
• Profile Designed for Installation on Gas Block


Rear Sight Detail Information:
• Integral Picatinny Mounting Deck to Fit All Flat Tops
• Dual Aiming Apertures for All Shooting Requirements
• Precision Windage Adjustments
• Clever and Robust Flip-up Posi-lock Design to Guarantee Zero in the Most Extreme Combat Conditions
• User Friendly Locking Thumb Nut for Easy Installation



Model 136 - Accushot 80mm SWAT AO Big Wheel-(fits Model #132 - SWAT Scope)

Detail Information:
• Deluxe Add-on Wheel for Side Wheel Adjustable Turret on Full Size SWAT scopes



Model 137 - UTG Long Range Spot Focus QD Weapon-mount & Handheld Multi-Function LED Flashlight

Detail Information:
• 40mm 5-function LED Flashlight with 200 Lumens of Max. Output and 800 Yards of Effective Illumination
• Best in class with CREE R2 LED
• Long Distance Spot Focus Lamp Produces Highly Focused Light Beam
• 5-function Integrated Reflector & Bulb (IRB) with 3 Brightness levels, Strobe and Signal Functions
• Interchangeable Light Body with Integral Mounting Deck Features Innovative Quick Detach/Lock Lever with Full Adjustability to Fit on Any Picatinny Rail
• Complete Operating Solutions with Twist-on Switch, Push Button Switch or Coiled Remote Pressure Switch
• Precision Machined Aircraft-grade Aluminum Body with Law Enforcement Rated Rolling Stop Shoulder
• Includes 2 Combustion-proof Batteries



If you like the look of the Ruger SR-22, you are going to love the look after you get these accessories on the rifle.


We search constantly for the best quality and most reasonably priced products we can find to give you the best quality & prices we can.
It is my sincere hope that these accessories are just what you wanted; but if there is a problem, please contact us at:

573-348-5570
or E-Mail us at


.



E-Tac Rail Systems, Combat Brush Guards and Flash Hiders are MADE IN THE USA.

When you see a soldier, stop and say “THANKS” to them for their service.
They serve and some pay the ultimate price so you and I can enjoy all our freedoms.

Please check back later for new updates on our website. There's much more to come!